Roof-to-Chimney Flashing for Dallas Homes

Chimney Flashing Installation in Dallas for a Waterproof Roof-to-Chimney Joint

Flashing Seals the Gap Between Your Chimney and Roof

Your roof shingles end where they meet the chimney. This joint needs metal flashing to direct rain over the roof instead of into the house.

Missing, loose, rusted, or poorly layered flashing leaves gaps around the chimney. Water then reaches the roof deck, ceiling, insulation, or wall beside the fireplace.

Our chimney flashing installation Dallas service seals this joint with base flashing, step flashing, and counter flashing suited to your roof and chimney.

Step Flashing and Counter Flashing Work Together to Stop Water

Chimney flashing has several pieces of metal. Each piece protects a different side of the chimney. Base flashing covers the lower side facing the roof slope. Step flashing is located along both chimney sides and overlaps the roof shingles. Counter flashing attaches to the chimney masonry and overlaps the step flashing. This layered design directs rain down the roof without leaving an open joint beside the brick.

Find Chimney Sweep Near You

Call (469) 445-0025 or enter your zip code to check availability.

Chimney Sweep & Flashing Installation

10%off

Per Chimney Sweeping
Includes Inspection
Cap & Crown Inspection
Draft & Ventilation Check
High-Quality Tools & Vacuums
Animal Remover
Chase Cover - Free Consultation
Satisfaction Guaranteed
Member of the NCSG & CSIA Certified
100% Satisfaction Guaranteed

Brands We Work With

United Home Services

Loose Flashing Causes Water Stains Beside the Chimney

All Work Gurranteed

A brown mark near the ceiling does not always mean the shingles have failed. Water can enter at the roof to chimney junction and travel beneath the roof covering before reaching the interior of your home.

Look for:

• Water stains beside the chimney
• Damp drywall after rain
• Loose metal near the brick
• Rusted flashing
• Cracked or missing sealant
• Gaps between flashing and mortar
• Water inside the attic
• Repeated leaks after roof repairs

Chimney Flashing Installation Cost in Dallas

The chimney flashing installation cost in Dallas depends on the chimney width, roof slope, flashing material, roofing type, damage, and access.

Chimney Flashing Inspection and Estimate

Free On-Site Estimate

Includes a visible roofline, flashing, masonry, and leak-area review.

Limited Chimney Flashing Repair

Custom Quote

Suited for one loose section, a failed joint, or minor sealant work.

Complete Chimney Flashing Replacement

Custom Quote

Best for rusted metal, failed overlaps, repeated leaks, or roof replacement projects.

New Flashing and Chimney Cricket Work

Custom Quote

Choose for new chimneys, wide roof penetrations, and areas where water collects uphill.

The chimney flashing estimate also depends on the list of materials and installation work. Chimney flashing replacement cost increases when roof or masonry repairs are also required.

Financing To Help With Larger Roofline and Masonry Repairs

A small flashing repair does not cost much. However, full flashing replacement, a chimney cricket, damaged roof decking, or masonry repair increases the project cost.

UHS offers financing through Synchrony and Turns for qualified homeowners and eligible projects. Start with a free on-site estimate. Review the flashing and related repair work before selecting an available payment option.

✔ Flexible payment options
✔ Financing for qualifying projects
✔ Free on-site estimates
✔ Clear installation scope

Our Chimney Flashing Services

What is chimney flashing?

Chimney flashing is the metal barrier installed where your chimney meets the roof. It creates a waterproof seal that prevents rainwater from entering your home through gaps between the chimney and roofing materials.

How do I know if my chimney flashing is damaged?

Common signs include water stains on ceilings or walls near the chimney, leaks during heavy rain, rusted or loose metal, cracked sealant, or visible gaps around the chimney base. If you notice any of these issues, it’s important to schedule an inspection.

Why is chimney flashing important?

Proper chimney flashing protects your home from water intrusion, which can cause structural damage, mold growth, and costly repairs. Well-installed flashing helps extend the life of both your chimney and roof.

Wide Chimneys Need Extra Water Control on the Upper Side

Rainwater collects on the uphill side of a wide chimney. A chimney cricket forms a raised slope behind it and directs water toward both sides. The International Residential Code calls for a cricket or saddle on the ridge side of roof penetrations wider than 30 inches. The cricket also needs proper flashing. See IRC roof flashing requirements.

We check the chimney width, roof slope, and water path before recommending this work.

A+ Company Rating

United Home Service Areas

Though we started small, our commitment to customer satisfaction has helped us grow and expand our services across the DFW area and multiple locations. We continue to deliver the same dedication and quality service that defined us from day one.

United Home Services is proud to serve homeowners across the DFW area and surrounding locations.

Residential Chimney Flashing Installation Across Dallas County

UHS provides chimney flashing installation for homes in Dallas throughout Lakewood, Lake Highlands, North Dallas, East Dallas, Oak Cliff, Kessler Park, Preston Hollow, and M Streets.

We also provide residential roof chimney flashing Dallas services in Addison, Balch Springs, Carrollton, Cedar Hill, Coppell, DeSoto, Duncanville, Farmers Branch, Garland, Grand Prairie, Highland Park, Irving, Lancaster, Mesquite, Richardson, Rowlett, Sachse, Sunnyvale, and University Park.

Call 833-613-5907 to confirm service at your address.

Professional Chimney Flashing Installation to Protect the Roof Deck

Flashing must connect with both the roof covering and chimney masonry. Metal placed over the shingles without proper overlaps leaves water paths underneath. Our roof-to-chimney flashing installation process includes:

• Inspect the roof to chimney junction.
• Measure the chimney and roof slope.
• Remove damaged flashing when required.
• Install the base and step flashing.
• Add counter flashing over the upper edges.
• Seal approved joints and inspect the completed water path.

The building code requires flashing at roof intersections and openings to prevent moisture intrusion. Review the IRC flashing standard.

Schedule Your Chimney Flashing Service Today

Our Testimonials

What Our Customers Think About United Home Services

      
   United Home Services
   301 Google reviews 
  Write a review 
  
 
 
   
 
 
       Posted on Google  
   
   Promoneyman Ps4 
 
 
 
 Trustindex verifies that the original source of the review is Google. We booked an air duct cleaning and it was a great decision. The crew arrived on time, worked in an organized way, and made sure everything was cleaned properly. The house felt fresher right after🔥🔥🔥
  
 
      Posted on Google  
   
   yanna sanders 
 
 
 
 Trustindex verifies that the original source of the review is Google. thank you very much for your service  highly recommended for this company they did a great job!!
  
 
      Posted on Google  
   
   Darien Scott 
 
 
 
 Trustindex verifies that the original source of the review is Google. Scheduled a chimney cleaning with United Home Services and Caleb handled the job smoothly.
  
 
      Posted on Google  
   
   Candy Andy Productions 
 
 
 
 Trustindex verifies that the original source of the review is Google. We had rain entering through the chimney and needed a solution. Eli installed a cap and checked the area to make sure it was sealed well💙✅
  
 
      Posted on Google  
   
   Anthony Velazco 
 
 
 
 Trustindex verifies that the original source of the review is Google. Technician Isaac handled our duct cleaning and did a great job. He was friendly, detailed, and didn't rush the work at all. He explained what he was doing during the process and made sure every vent was properly cleaned. Before leaving, he checked everything to make sure the system was working well.
  
 
      Posted on Google  
   
   kunanon Doungsuwan 
 
 
 
 Trustindex verifies that the original source of the review is Google. My experience with this company was not as smooth as I had expected. The scheduling process felt unclear, and it was difficult to get a confirmed time for the appointment. When the technician arrived, the service felt rushed, and I did not receive a detailed explanation of the work being performed. I was hoping for better communication and a more organized approach throughout the process.
  
 
      Posted on Google  
   
   Kely Rivas 
 
 
 
 Trustindex verifies that the original source of the review is Google. Aiden handled our chimney sweep and cleared out soot that had been building up inside🔥❤️
  
 
      Posted on Google  
   
   Amy Moran 
 
 
 
 Trustindex verifies that the original source of the review is Google. We had rain getting into the chimney and wanted to fix it early. Caleb installed a cap and also checked the chimney top to make sure everything was sealed properly❤️👌🏻
  
 
      Posted on Google  
   
   Emanuel Tovar 
 
 
 
 Trustindex verifies that the original source of the review is Google. I called United Home Services for an air duct cleaning and they did a great job.
The technicians were respectful and made sure everything was clean before leaving.
The whole process felt smooth and well organized.
  
 
      Posted on Google  
   
   Landon G 
 
 
 
 Trustindex verifies that the original source of the review is Google. Great experience from start to finish. The crew was professional and took the time to do the job properly. You can really notice the difference in the air after the cleaning, and everything was.left clean👍👍

Chimney Flashing Installation & Replacement near me

…And More!

EXPERT CARE FOR YOUR CHIMNEY

Schedule your professional chimney services today,
Call now or book online in minutes!

Frequently Asked Questions

What does chimney flashing do?

Chimney flashing seals the joint where the chimney passes through the roof. It directs rain over the roof covering instead of into the house.

What is the difference between step flashing and counter flashing?

Step flashing overlaps the roof shingles along the chimney sides. Counter flashing attaches to the chimney and covers the top edge of the step flashing.

When does chimney flashing need replacement?

Replace flashing with rust holes, loose sections, failed overlaps, or repeated leaks. Local repair suits limited damage when the remaining metal stays secure.

Does new roof installation require new chimney flashing?

The existing flashing needs inspection during roof replacement. Damaged, poorly installed, or incompatible flashing needs replacement before the new roof work is complete.

How much does chimney flashing installation cost?

Cost depends on the chimney size, roof slope, flashing material, roof access, and connected repairs. UHS provides a free on-site estimate.

Does flashing prevent every chimney leak?

No. Flashing prevents water entry at the roof joint. Crown cracks, missing caps, and damaged masonry need separate repairs.